AIRTRONICS MT-4s Betriebsanweisung PDF herunterladen (Seite 52)



T R

The Binding function allows you to Bind the transmitter and receiver pair. When new, it is necessary to pair the transmitter

and receiver to prevent interference from transmitters operated by other users. This operation is referred to as Binding. Once

the Binding process is complete, the setting is remembered even when the transmitter and receiver are turned OFF. Therefore,

this procedure usually only needs to be done once. In addition, the Modulation Type and Servo Operating Mode can also be

changed to suit your specific setup.

Changing the Modulation Type:

The Modulation Type function allows you to choose the transmitter Modulation Type. The Modulation Type can be changed

to match the receiver you're using. For example, if you wish to use an Airtronics 2.4GHz FH2 receiver with your transmitter,

you would need to change the Modulation Type to FH2 prior to Binding your transmitter and receiver. Modulation Type

is model-specific, meaning that you can have one model use FH4T Modulation and another model use FH2 Modulation, etc.

The Modulation Type must be chosen prior to Binding the transmitter and receiver. Make sure the Modulation Type you

choose matches the Modulation Type of the receiver you're using.

1) From within the SYSTEM menu, scroll UP or DOWN to highlight the BIND menu.

The following Modulation Type options are available:

FH2 - Select this Modulation Type when using an Airtronics 2.4GHz FH2 surface receiver.

FH3 - Select this Modulation Type when using an Airtronics 2.4GHz FH3 receiver.

FH4T - Select this Modulation Type when using an Airtronics 2.4GHz FH4T Telemetry receiver.

FH3F/FH4FT - These Modulation Types are NOT used in North America. They are typically used in France.

2) Press the ENTER key. The BIND menu will be displayed and [RF MODE]:FH4T will be

highlighted.

3) Press the ENTER key, then scroll UP or DOWN to select the desired Modulation Type,

then press the ENTER key a second time. Set to (Modulation Type) NO/YES will be

displayed.

4) Scroll DOWN to highlight YES, then press the ENTER key.











Changing the Channel Mode - FH2 Modulation Type Only:

When the FH2 Modulation Tyep is selected, you can choose to operate the transmitter in either 2-Channel Mode or 4-Channel

Mode. This option is available ONLY when [RF MODE] FH2 is selected.

1) From within the BIND menu, scroll DOWN to highlight [CH]:4ch.

2) Press the ENTER key, then scroll UP or DOWN to choose the desired Channel Mode.

Selecting 2CH will enable 2-channel operation (Steering and Throttle). Selecting 4CH

will enable 4-channel operation (Steering, Throttle, Auxiliary 1 and Auxiliary 2).

BIND CH setting range is 2CH and 4CH. The default setting is 4CH.

IMPORTANT: Not all BIND menu functions are supported by all Modulation Types. Only supported functions will be

displayed once a Modulation Type is chosen. For example, the FH2 Modulation Type does not support the ability to change

the Servo Operating Mode.

Changing the Servo Operating Mode:

The Servo Operating Mode function is used to optimize the radio control system to suit the type of servos you're using in your

model. For example, using the SHR setting with Digital servos will Increase the servo's response time, even above the

manufacturer's stated specification. If you're using Airtronics SRG Digital servos, you can use the SSR setting for the fastest

response time. The combination of using Digital servos and using the correct Servo Operating Mode results in the ultimate feel

and response, making you feel more in control of your model than ever.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 87 88

Kommentare zu diesen Handbüchern

Keine Kommentare

AIRTRONICS MT-4s Betriebsanweisung Seite 52

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Fernbedienungen AIRTRONICS MT-4s