AIRTRONICS MT-4s Betriebsanweisung PDF herunterladen (Seite 19)

T R



Adjusting the Throttle Dual Rate Percentage Value:

1) From within the D/R menu, scroll UP or DOWN to highlight [TH]:RATE 100%.

2) Press the ENTER key, then scroll UP or DOWN to increase or decrease the Throttle

Dual Rate percentage value. When the Throttle Dual Rate percentage value is decreased,

Throttle High side servo travel is decreased. When the Throttle Dual Rate percentage

value is increased, Throttle High side servo travel is increased.

D/R TH RATE setting range is 0% to 100%. The default setting is 100%.

Adjusting the Brake Dual Rate Percentage Value:

1) From within the D/R menu, scroll UP or DOWN to highlight [BR]:RATE 100%.

2) Press the ENTER key, then scroll UP or DOWN to increase or decrease the Brake Dual

Rate percentage value. When the Brake Dual Rate percentage value is decreased, Throttle

Brake side servo travel is decreased. When the Brake Dual Rate percentage value is

increased, Throttle Brake side servo travel is increased.

D/R BR RATE setting range is 0% to 100%. The default setting is 100%.

Trm3

[

]

Trm4

[

]

Controlling the Dual Rate Function:

1) By assigning the Steering, Throttle and Brake Dual Rate programming functions to

one or more of the Trim Switches, Auxiliary Lever or Dial Knob, these functions can

be adjusted while driving without accessing the Programming Menu. In addition,

these functions can be toggled OFF and ON by assigning them to one or more

Push-Button Switches. For more information, see the Key Assignments section on

pages 53 through 58.

In the default configuration, the Steering and Throttle Dual Rate programming

functions are adjusted using Trim Switch Trm3 and Trim Switch Trm4, respectively.

D/R ST RATE setting range is 0% to 100%. The default setting is 100%.

3) Press the ENTER key, then scroll UP or DOWN to increase or decrease the Steering

Dual Rate percentage value. When the Steering Dual Rate percentage value is decreased,

steering servo travel is decreased. When the Steering Dual Rate percentage value is

increased, steering servo travel is increased.















Adjusting the Steering Dual Rate Percentage Value:

1) From the Top Screen, press the ENTER key to open the Programming Menu list.

2) Scroll UP or DOWN to highlight the D/R menu, then press the ENTER key. The D/R menu

will be displayed and [ST]:RATE 100% will be highlighted.

PROGRAM

The End Point Adjustment function allows you to adjust servo travel in each direction. This makes it possible to balance servo

travel in both directions and set the maximum desired amount of servo travel. For example, on a gas-powered model, if you

pull the throttle trigger and the carburetor does not open completely, you can increase the Throttle High End Point Adjustment

so that the carburetor opens completely. Another example is with steering. If your model turns sharper to the right than to the

left, you can increase the Steering Left End Point Adjustment to balance the steering. The End Point Adjustment function can be

adjusted for the Steering channel (Right and Left), the Throttle channel (Throttle High Side and Throttle Brake Side), Auxiliary 1

Channel 3 (High and Low) and Auxiliary 2 Channel 4 (High and Low).











1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 87 88

Kommentare zu diesen Handbüchern

Keine Kommentare

AIRTRONICS MT-4s Betriebsanweisung Seite 19

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Fernbedienungen AIRTRONICS MT-4s