AIRTRONICS M12 Betriebsanweisung PDF herunterladen (Seite 80)















The Adjustable Rate Control (ARC) function allows you to vary the amount of servo travel in relation to the movement of the

Steering Wheel and Throttle Trigger (or in some cases, the Auxiliary Dial and/or the Auxiliary Lever) near the Neutral positions to

change the way those functions react to control movement.

Decreasing the ARC Rate percentage value will Soften the control feel around Neutral and Increasing the ARC Rate percentage

value will Heighten the control feel around Neutral. Using a Lower Negative value allows for smoother control. Using a Higher

Positive value may result in more 'twitchy' control response.

The Adjustable Rate Control function works like the Exponential function, except that the Adjustable Rate Control function features

the added benefit of being able to move the Neutral Point, whereas the Exponential function Neutral Point is fixed. In addition, the

ARC Curve is more Linear than the Exponential Curve.

Adjustable Rate Control Programming Values can be changed while you're driving by Assigning these functions to a Trim

Switch, the Auxiliary Dial or the Auxiliary Lever. For more information, see the

ASSIGN Menu

section on pages 33 ~ 38.

ARC Rate percentage values can be adjusted from Mild through Linear to Quick to

allow you to set the most effective control response for your Model. For example, if

your Model over-steers, reduce the Steering ARC Rate percentage value and if your

Model under-steers, Increase the Steering ARC Rate percentage value.

For another example, reduce the Throttle High Side ARC Rate percentage value on

a slippery track or with a Model that has a Higher-torque motor or engine, and

Increase the Throttle High Side ARC Rate percentage value on a high-grip track or

with a Model that has a Lower-torque motor or engine.

For the utmost in precision control, ARC Point and Rate values can be adjusted

separately for the Throttle High Side and the Throttle Brake Side. A graph that

depicts the control output and ARC Curve relationship is featured to help visualize

the changes you make.

Quick

(1% to 100%)

Linear

(0%)

Mild

(-1% to -100%)

100%

Amount of Servo Operation

Amount of Control Operation

Adjustable

Neutral Point

Choosing the Channel and the Curve Type:

1) From within the RACING menu, scroll UP or DOWN to highlight the CURVE

menu.

2) Press the ENTER key to open the CURVE menu. The < ST > channel will be

Selected.

3) Press the SELECT switch RIGHT or LEFT to choose the desired channel you

would like to program ARC for.

4) From within the CURVE menu, scroll UP or DOWN to highlight the TYPE > value.

5) Press the ENTER key and scroll UP or DOWN to choose TYPE > ARC.

Changing the Point Value:

The Point value determines the Neutral Point where the Rate percentage value begins. For example, you may not want the Neutral

Point to be centered between the High and Low End Points. You might want the Neutral Point shifted to the Right or to the Left.

1) From within the CURVE menu, scroll UP or DOWN to highlight POINT > 50.

2) Press the ENTER key, then scroll UP or DOWN to Increase or Decrease the

Point value. Increasing the Point value will shift the Neutral Point to one side

of center and Decreasing the Point value will shift the Neutral Point to the

opposite side of center.

POINT setting range is 5 to 95. The default setting is 50 (Centered).

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 115 116

Kommentare zu diesen Handbüchern

Keine Kommentare

AIRTRONICS M12 Betriebsanweisung Seite 80

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Fernbedienungen AIRTRONICS M12