AIRTRONICS M12 Betriebsanweisung PDF herunterladen (Seite 36)













Changing the Trim Switch Direction of Travel:

The direction that the Trim Switches move the servos or function values can be changed from Normal to Reverse. In Normal mode,

the Trim Switches will move the servos toward the High Side or Increase function values when the Trim Switches are pushed

Forward. In Reverse mode, the Trim Switches will move the servos toward the Low Side or Decrease function values when the

Trim Switches are pushed Forward.

1) From within the TRIM menu, scroll UP or DOWN to highlight the Trim Switch

Number [REV] you would like to change. Choose from TRM1 [REV],

TRM2 [REV], TRM3 [REV], TRM4 [REV] or TRM5 [REV].



The Dial Assignments function allows you to Assign a multitude of different functions to the Auxiliary Dial. This allows you to use

the Auxiliary Dial to control those functions while you're driving. The Auxiliary Dial can control either of the two Auxiliary channels or

it can control a function, such as Steering Dual Rate or Steering Exponential. In addition, the Trim Resolution (Step value) and the

Direction of Travel (REV) of the Auxiliary Dial can be changed.

Changing the Auxiliary Dial Function Assignment:

1) From within the SYSTEM menu, scroll UP or DOWN to highlight the ASSIGN

menu.

2) Press the ENTER key to open the ASSIGN menu, then scroll UP or DOWN to

highlight the DIAL menu.

3) Press the ENTER key to open the DIAL menu. DIAL [FUNCTION] > AUX1 will be

highlighted.

4) Press the ENTER key, then scroll UP or DOWN to choose the desired function

you want to Assign to the Auxiliary Dial. A complete list of functions that can be

Assigned to the Auxiliary Dial is shown in the table on page 100.

Changing the Auxiliary Dial Step Value:

The Step function allows you to adjust how far a servo travels or a function moves when the Auxiliary Dial is turned. You can

Increase the Trim Resolution by Decreasing the Step value, so that the amount of travel is less when you turn the Auxiliary Dial.

This makes it possible to fine-tune servo travel or function movement extremely accurately. Alternately, you could Decrease the

Trim Resolution by Increasing the Step value, so that the amount of travel is more when you turn the Auxiliary Dial. This may not

be as accurate, but it allows you to command large amounts of servo travel or function movement at a time.

2) Press the ENTER key, then scroll UP or DOWN to change the desired Trim

Switch Reverse value.

REV setting range is NOR and REV. The default setting is NOR.

3) Repeat step 2 to change any other desired Trim Switch Reverse values.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 115 116

Keine Kommentare

AIRTRONICS M12 Betriebsanweisung Seite 36