AIRTRONICS MX-V Betriebsanweisung PDF herunterladen (Seite 15)

V 3

CHANNEL 2.4GHZ RADIO SYSTEM USER'S GUIDE

ALb - ANTI-LOCK bRAKING

Activating the Anti-Lock Braking Function, Continued:

2) Press the INCREASE or DECREASE keys to choose the desired Anti-Lock Braking

Pulse Rate value. The Pulse Rate value determines how fast the throttle servo

pulsates the brake. Experimentation will be necessary to determine which Pulse

Rate value to use.

ALB setting range is OFF, SLW (Slow), NOR (Normal) and FST (Fast). The default setting is OFF.

Due to the nature of the Anti-Lock Braking function, we suggest using a high-quality, strong throttle servo. If your throttle

servo is not strong enough, the Anti-Lock Braking function may not operate optimally.

The Servo Trim function allows you to view the currently programmed Servo Trim value for the steering and throttle channels and,

if desired, allows you to change the Trim values from within the TRIM menu, using the programming keys.

The transmitter features Digital Trim Memory. Any amount of Steering or Throttle Trim that you set during use by pressing the Trim

Switches or using the TRIM menu is automatically stored in memory for that specific channel and for that specific Model Number.

The Trim values for each model will automatically be loaded when the transmitter is turned ON.

Before adjusting the Trim values, you should first adjust the servo Sub-Trim values to center the servo horns. For more

information, see the

Servo Sub-Trim

section on pages 16 and 17.

The Servo Trim function should not be used to center the steering and throttle servos. Use the Servo Sub-Trim function

for that. The Servo Trim function is used to make trim adjustments to your model during use. For example, if your models

always pulls to the left while driving, apply enough Steering Right Trim to make you model drive straight.

TRIM - SERVO TRIM

Changing the Steering Servo Trim Values:

1) Press the MENU UP or MENU DOWN keys to open the TRIM menu. TRIM will flash

and ST 0 will be displayed.

2) Press the INCREASE or DECREASE keys to adjust the Steering Servo Trim value

either Right or Left. The actual direction will differ based on the steering channel's

Servo Reversing setting.

TRIM ST setting range is R25 to L25. The default setting is 0.

Changing the Throttle Servo Trim Values:

1) From within the TRIM menu, press the MENU UP or MENU DOWN keys to display

TH 0.

2) Press the INCREASE or DECREASE keys to adjust the Throttle Servo Trim value

either Forward or Brake. The direction will differ based on the throttle channel's

Servo Reversing setting.

TRIM TH setting range is F25 to B25. The default setting is 0.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Keine Kommentare

AIRTRONICS MX-V Betriebsanweisung Seite 15